3Com Router Command Reference Guide — V1.00static: Display all the static routes.default: Display the default route.verbose: Display the route details.DescriptionUsing the display ipx routing-table command, you can view the IPX routing table.The output of this command is helpful for IPX RIP fault diagnosis.Example# Display IPX routing-table.[Quidway] display ipx routing-tableCodes: C - Direct connected network, S - Static, F - Float, s - seconds, u- uses5 Total IPX routes.Up to 1 parallel paths, 4 reserved paths and 16 hops allowed.Current default route is:S FFFFFFFE [010/02/010] via 2.0A03.0C50.0003, Ethernet0C 2 (NOVELL-ETHER), Ethernet0C 1000 (PPP), Serial0S 100 [010/02/010] via 1000.0B00.CD00.0000, Serial0F 10 [060/02/010] via 2.0A03.0C50.0003, 10s, Ethernet05.1.4 display ipx service-tableSyntaxdisplay ipx service-table [ type service-type | name name | network network |socket socket | order { net | type } ] [ verbose ]ViewAll viewsParametertype: Tthe specified service type.service-type: Type of service.name: The specified service namename: Name of server.76
