SecurityFor related commands, see reset encrypt-card sa all, display encrypt-card ipsecsa parametersExample# Display all the SA information of the crypto card.[3Com] display encrypt-card ipsec sa all 3esp SAsproposal: ESP-ENCRYPT-BLOWFISHproposal: ESP-AUTH-MD5HMAC96local address: 2.1.1.1peer address: 2.2.2.2sa timing: remaining key lifetime (bytes/sec): (1887436800/2592)spi: 54321 (0xd431)Encrypt card slot-id: 3esp SAsproposal: ESP-ENCRYPT-BLOWFISHproposal: ESP-AUTH-MD5HMAC96local address: 2.2.2.2peer address: 2.1.1.1sa timing: remaining key lifetime (bytes/sec): (1887436800/2592)spi: 12345 (0x3039)Encrypt card slot-id: 34.1.6 display encrypt-card ipsec sa parametersSyntaxdisplay encrypt-card ipsec sa parameters remote-address ah | esp spi-numberViewAll views.Parameterremote-address: Destination IP address.spi-number: Security parameter index.DescriptionUsing the display encrypt-card ipsec sa parameters command, you can view thespecified SA information on the crypto card.47
