Routing ProtocolParameterseconds: The interval of OSPF waiting for the neighbor's responding and confirmingthe routing information packet after sending it by OSPF (Unit: second). In case oftimeout, OSPF will retransmit the routing information packet. ranging from 1 to 65535seconds. By default, it is 5.DescriptionUsing the ospf timer retransmit command, you can configure the time of the waitedtimer after the routing information packet is sent by OSPF. In case of timeout, OSPFwill retransmit routing information packet. Using the undo ospf timer retransmitcommand is to restore the default time of timer.If a router transmits an LSA, it need receive back the acknowledgment from theneighbors. If it fails to receive this ACK message within this retransmit interval, it willretransmit this LSA.Note that the LSA retransmission interval of neighboring routers should be not toosmall to prevent unnecessary retransmission.Example# Set the LSA retransmit interval at Serial 0 to be 8 seconds.[3Com-Serial0] ospf timer retransmit 83.1.34 ospf trans-delaySyntaxospf trans-delay secondsundo ospf trans-delayViewInterface viewParameterseconds: Delay time the interface sends LSA information, in the range from 1 to65535 seconds. By default, it is 1 second.63
