Link Layer ProtocolThe information displayed above indicates that the Frame Relay interface is DTE, 100“status enquiry” packets have been sent, 100 “status” packets have been received, no“status” packets are discarded, and no “status” packet timeout occurs.6.1.13 display fr map-infoSyntaxdisplay fr map-infoViewAll viewsParameterNoneDescriptionUsing the display fr map-info command, you can view the Frame Relay addressmapping table.The information displayed by this command is used to view whether the static addressmapping is correctly configured, and whether the dynamic address mapping worksnormally.For related commands, see fr map, fr inarp.Example# Display the Frame Relay address mapping table.[3Com]display fr map-infoInterface:Serial0:0(protocol status is up):ip address:66.66.1.2, dlci:16(0x10), map-type:staticbroadcast:no, framerelay type:IETF, link status:active6.1.14 display fr pvc-infoSyntaxdisplay fr pvc-info [ serial interface-number ] [ dlci dlci-number ]ViewAll viewsParameterinterface-number: Serial interface number.dlci-number: DLCI number101
