Security4.1.13 display ipsec saSyntaxdisplay ipsec sa { all | brief | remote ip-address | policy policy-name[ sequence-number ] | parameters dest-address protocol spi }ViewAll viewsParameterall: Displaying information about all the SAs.brief: Displaying brief information about all the SAs.remote: Displaying information about the remote address.ip-address: Specifying the remote address whose IP address format is A.B.C.D.policy: Displaying information about the SA in the IPSec policy group whose name ispolicy-name.parameters: Displaying information about a SA uniquely identified by the destinationaddress, protocol, and SPI.dest-address: Specifying the destination address, in the IP address format ofA.B.C.D.protocol: Specifying a protocol by inputting the ah or esp key word without casediscrimination.spi: Specifying security parameter index (SPI).DescriptionUsing the display ipsec sa command, you can view the relevant information aboutthe SA.This command is applicable to the IPSec module of the operating system.brief command displays brief information about all the SAs, whose display format isthe brief format (see the following example). The brief command can be used toquickly display all the SAs already set up. Brief information includes source address,destination address, SPI, protocol, and algorithm. A display beginning with E in thealgorithm stands for the encryption algorithm, and a display beginning with A standsfor the authentication algorithm.55
