3Com Router Command Reference Guide — V1.00Example# Specify count maximum of interior to 100.[Quidway]ip count interior-threshold 100# Specify count maximum of interior to 512, the default value.[Quidway]undo ip count interior-threshold4.1.10 ip count outbound-packetsSyntaxip count outbound-packetsundo ip count outbound-packetsViewInterface viewParameterNoneDescriptionUsing the ip count outbound-packets command, you can configure IP Count tomake statistics on the output packets on the current interface. Using the undo ipcount outbound-packets command, you can disable IP Count to make statistics onthe output packets on the current interface,.By default, no statistics is made on the packets output from the interface.The information of a packet will be retained either in Exterior-List or in Interior-List,depending on whether the packet matches any IP Count lists.Example# Set IP Count to make statistics on the packets output from the interface Ethernet0.[Quidway-Ethernet0]ip count outbound-packets4.1.11 ip count tableSyntaxip count table ip-address maskundo ip count table [ ip-address mask ]70
