Multicast ProtocolDescriptionUsing the display igmp group command, you can view the conditions of groupmembers known through IGMP packet in the direct connected subnet.Output the existing conditions of group membership.For related commands, see igmp timer query.Example[3Com] display igmp groupEthernet0 (169.254.21.21): Total 1 IGMP Group reported:Group Address Uptime Expires Last Reporter224.1.1.1 00:00:03 00:02:57 169.254.21.21LoopBack2 (5.5.4.4): No multicast-group joinedTable 1-1 Meaning of Information Parameters Displayed with the Command “display igmp group”Domain DescriptionGroup address Multicast group addressUptime Time since the multicast group was found (H, M. S)Expires Record the predefined time to be deleted from IGMP group table. (H, M, S)Last Reporter The last host which is reports as the multicast group membership.1.1.3 display igmp interfaceSyntaxdisplay igmp interface [ type number ]ViewAll viewsParametertype: Interface typenumber: Interface numberDescriptionUsing the display igmp interface command, you can view the configurationinformation of IGMP interface.For related commands, see igmp group-policy, igmp timer query.Example[3Com] display igmp interfaceEthernet0 (10.110.51.39):IGMP is enabled on interface3
