Dial-Up1.1.23 display dialer routeSyntaxdisplay dialer route [ detail ]ViewAll viewsParameterdetail: Display the dynamic dialer number mapping information. If the parameterdetail is not input, the static dialer number mapping information will be displayed.DescriptionUsing the display dialer route command, you can view static configuration ordynamically generated dialer number mapping information.For related commands, see dialer route.Example# Display the static dialer routes of all the DCC interfaces.[3Com] display dialer route(static) dialer route ip 110.1.2.2 (6688049) on AnalogModem0(static) dialer route ip 115.1.1.1 (6688037) on Dialer1(static) dialer route ip 115.1.1.1 (6688052) on Dialer1(static) dialer(static) route ip 3.0.0.2 (660300) on Serial1# Displays the dynamic dialer routes created by all the DDR interfaces.[3Com] display dialer route detail(dynamic) dialer route ip 155.1.1.1 (6688037) on AnalogModem5 : Dial outUse Sec: 0Idleout Sec: 81Table 1-2 Information displayed by executing the display dialer route commandField DescriptionState The route is statically configured or dynamically created.IP address Remote IP address with which the route is associatedDialer number Dialer number for the route to call the remote endInterface Interface on which the route is createdRoute type Type of the interface on which the route is created: Dialer, Receiver, or Callback23
