Security4.1.4 display encrypt-card detailsSyntaxdisplay encrypt-card details [ slot-id ]ViewAll viewsParameterslot-id The ID of the slot where the crypto card is located. The value range isdetermined by the number of the slots on the router. If no value is input, the operationwill be implemented on all the crypto cards.DescriptionUsing the display encrypt-card details command, you can view the detailedinformation of the crypto cards.This command is applicable to crypto cards.The command is used to query the information like status of the crypto cards, bytesequence and hardware address. Besides, it can be used to query the debuggingstatus, all the statistics and the statistic information one second before executing thecommand. The information includes: the number of packets, bytes transmitted andreceived by the crypto cards, and the number of packets discarded per second. If theinput slot number is greater than the number of the slots on the router, the prompt“Invalid encrypt-card slot-id.” will be displayed.Example# Display how to query the statistics of the handling process of the crypto cards.[3Com] display encrypt-card detailsEncrypt-Card 0 Details :Status : readyDriver Status : readyByte Order : not consistent with the hostCmdTimerID : 0x00000006TdbTimer : 0x00001dedRecentErrors : 0x00000000Debug Switch :command debug switch : offerror debug switch : off45
