Routing ProtocolParameterinterface-type: Interface type.interface-number: Interface number.DescriptionUsing the display ospf interface command, you can view the interface informationrelated to the OSPF.Information output via this command shows the configuration and running of OSPF atthe interface and can help the user in confirming if the configuration is correct orperforming OSPF fault diagnosis.Example# Display the database information about OSPF state.[3Com]display ospf interfaceArea: 0.0.0.0IP Address Type State Cost Pri DR BDR192.1.1.1 PtoP P To P 1562 1 None NoneArea: 0.0.0.1IP Address Type State Cost Pri DR BDR16.1.1.2 Bcast BackupDR 10 1 16.1.1.1 16.1.1.2[3Com] display ospf interface serial 1Interface: 202.38.160.1 (Ethernet0)Overhead: 1 Status: DR Type: BroadcastPriority: 1DR: 202.38.160.1Permitting DoNotAge lsaAuthentication word: noneTimer interval: Hello: 10 Poll: 0 Dead: 40 Retrans: 53.1.14 display ospf lsaSyntaxdisplay ospf lsa [ router_lsa | net_lsa | sumnet_lsa | asbr_lsa | external_lsa |nssa_external_lsa | adv_rtr | self_originate | ls_id ] [ area area-id ]ViewAll views45
