3Com Router Command Reference Guide — V1.00ViewSystem viewParameterstring: Describe system maintenance contact information, which comprises printablecharacters of 1 to 50 bytes (ASCII code is 32 to 127 in length). The default for string is“3Com Corporation, Marlborough, MA”.DescriptionUsing the snmp-agent sys-info contact command, you can configure systemmaintenance administrators’ contact information for network administrators’ inquiry.Using the undo snmp-agent sys-info contact command, you can restore systemmaintenance administrators’ contact information. The system defaults to 3Com'sinformation.You must correctly configure system maintenance contact information, so that thenetwork administrators can be in contact with the equipment administrator.One or multiple spaces are allowed in the system maintenance contact string. Ifmultiple, continuous spaces are input, the system will regard them as one space.The character “?” is not allowed to appear in the system maintenance contact string.For related commands, see snmp-agent, snmp-agent sys-info location, displaysnmp-agent sys-info contact.Example# Set the system contact information to “Dial System Operator at beeper # 27345”.[3Com] snmp-agent sys-info contact Dial System Operator at beeper # 27345# Restore the default system contact information.[3Com] undo snmp-agent sys-info contact3.1.17 snmp-agent sys-info locationSyntaxsnmp-agent sys-info location stringundo snmp-agent sys-info locationViewSystem view54
