System ManagementExample# Enable the router to send traps to 10.110.30.253, and the community name “public”is used.[3Com] snmp-agent trap enable[3Com] snmp-agent target-host trap address 10.110.30.253 securityname publicc3.1.21 snmp-agent trap lifeSyntaxsnmp-agent trap life timeoutundo snmp-agent trap lifeViewSystem viewParametertimeout: Timeout values are in seconds, ranging from 1 to 1000. By default, traps timeout after 30 seconds.DescriptionUsing the snmp-agent trap life command, you can configure the timeout time thattraps can be held. Using the undo snmp-agent trap life command, you can restorethe default timeout time that traps can be held.Suppose that the system is set to hold traps for some time, if a trap times out, it willbe discarded and the system will not transmit it or hold it any longer.For related commands, see snmp-agent, snmp-agent trap enable.Example# Set the traps to time out after 60 seconds.[3Com] snmp-agent trap life 603.1.22 snmp-agent trap queue-sizeSyntaxsnmp-agent trap queue-size length59
