3Com Router Command Reference Guide — V1.00Parametermseconds: The time interval to query the station which is in the LLC2 BUSY statusfor the second time. The value range is 1~6000ms while the default value is 300ms.DescriptionUsing the llc2 timer busy command, you can configure the waiting time while otherLLC2 station is in busy state. Using the undo llc2 timer busy command, you canrestore the time interval to the default value..In the case that LLC2 queries the station status, it will wait and query again if thestation status is BUSY.ExampleNone6.1.24 llc2 timer pollSyntaxllc2 timer poll msecondsundo llc2 timer pollViewEthernet interface viewParametermseconds: The P/F wait time of LLC2. The value range is 1~60000ms and thedefault value is 5000ms.DescriptionUsing the llc2 timer poll command, you can configure the P/F wait time of LLC2.Using the undo llc2 timer poll command, you can restore the P/F wait time of LLC2to the default value.After LLC2 sends a P frame, if it does not receive a F frame from peer, LLC2 willretransmit the P frame.ExampleNone114
