Securityacl-number: Displaying the access rules whose number are acl-number in the accesscontrol lists being used currently.Interface: Displaying the serial number of access rules to be applied at the interface.type: Type of the interface.number: Number of the interface.DescriptionUsing the display acl command, you can view packet filter rules and their applicationconditions at the interface.This command is used to display the specified rules and the condition of packetfiltered by the rule. Each rule has a corresponding counter. If a packet was filteredbased on this rule, the counter will increase by 1. By observing the counter, you cansee, among the configured rules, which rules are effective, and which are basicallyineffective.For related commands, see acl.Example# Display the currently used rule with a number of 100.[3Com]display acl 100Using the normal packet-filtering access rules now.100 deny icmp 10.1.0.0 0.0.255.255 any host-redirect(3 matches,252 bytes --rule 1)100 permit icmp 10.1.0.0 0.0.255.255 any echo (no matches -- rule 2)100 deny udp any any eq rip (no matches -- rule 3)# Display rule application at Serial0.[3Com]display acl interface serial 0Serial0:access-list filtering In-bound packets : 120access-list filtering Out-bound packets: None3.1.4 display firewallSyntaxdisplay firewallViewAll views31
