3Com Router Command Reference Guide — V1.00Chapter 1 L2TP Configuration Commands1.1 L2TP Configuration Commands1.1.1 allow l2tp virtual-templateSyntaxallow l2tp virtual-template virtual-template-number [ remote remote-name ]undo allowViewL2TP group viewParametervirtual-template-number: Number of the virtual template used to create a new virtualaccess interface, which is an integer in the range from 1 to 25.remote-name: Name of a remote tunnel originating a tunnel connecting request. It is acase-sensitive character string with the length ranging from 1 to 30 characters.DescriptionUsing the allow l2tp virtual-template command, you can configure the name of theremote tunnel when accepting the call and the virtual template to be used. Using theundo allow command, you can cancel the name of the remote tunnel.By default, no call can be dialed in.This command can only be configured on LNS. It is a required configuration.When L2TP group 1 (default L2TP group number) is used, it is permitted to configuregroup 1 without specifying remote-name, and the format of this command is:allow l2tp virtual-template virtual-template-number [ remote remote-name ]If the remote name is specified in L2TP group 1 view, then L2TP group 1 does notserve as the default L2TP group. In Windows 2000 beta 2, for example, the localtunnel name for the VPN connection is NONE, and the peer name received by the2
