3Com Router Command Reference Guide — V1.00Example# Set the timer idle on the interface Serial 0 to 50 seconds.[3Com-Serial0] dialer timer idle 501.1.18 dialer timer wait-carrierSyntaxdialer timer wait-carrier secondsundo dialer timer wait-carrierViewPhysical or dialer interface viewParameterseconds: Waiting time in seconds, ranges from 0 to 65535. By default, the timewaiting for a call connection is 60 seconds.DescriptionUsing the dialer timer wait-carrier command, you can configure the timeout time ofwait-carrier timer. Using the undo dialer timer wait-carrier command, you canrestore the default time of the timer.Wait-carrier timer begins to time after the DCC call is initiated. If the call connectionfails to be set up within the timeout time of this timer, the call will be terminated.If the connection for a call is not established yet within the specified time, DCC willterminate the call.Example# Set the maximum duration of the time that Serial 0 waits for call to establish to be100 seconds.[3Com-Serial0] dialer timer wait-carrier 1001.1.19 dialer userSyntaxdialer user usernameundo dialer user18
