110 | System Configuration Commandsw w w . d e l l . c o m | s u p p o r t . d e l l . c o m Example Figure 6-36. Using the copy command to Download the CLI Bannerenable passwdThis command changes the Privileged Exec password (commonly called the “enable” password),which is not set when SFTOS boots for the first time. First type the command, then press Enter.Syntax enable passwd passwordMode Global ConfigCommandHistorylogoutClose the current Telnet connection or reset the current serial connection.Syntax logoutMode Privileged Execcopy tftp://192.168.77.52/banner.txt nvram:clibannerMode........................................... TFTPSet TFTP Server IP............................. 192.168.77.52TFTP Path...................................... ./TFTP Filename.................................. banner.txtData Type...................................... Cli BannerAre you sure you want to start? (y/n) yCLI Banner file transfer operation completed successfully!(Force10 S50) #exitForce10 S50) >logoutFORCE10's Login Banner - Unauthorized access is punishable by law.User:RelatedCommands copy (clibanner) Downloads the CLI banner text file to the switch.write Saves the running configuration to NVRAM, duplicating the functionality ofcopy system:running-config nvram:startup-configParameters password Enter a text string, up to 32 characters long, as the clear text password.Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.Note: Save configuration changes before logging out.RelatedCommandsquit Close the current Telnet connection, or reset the current serial connection.