Stacking Commands | 223Preconfigured Model Identifier—This field displays the preconfigured model identifier for this switch. AModel Identifier is a 32-character field assigned by the device manufacturer to identify the device.Plugged-in Model Identifier—This field displays the plugged-in model identifier for this switch.Switch Status—This field displays the switch status. Possible values are OK, Unsupported, CodeMismatch, Config Mismatch, or Not Present.Switch Description—This field displays the switch description.Expected Code Type—This field indicates the expected code type.Detected Code Version—This field displays the version of code running on this switch. If the switch isnot present and the data is from pre-configuration, then the code version is “None”.Detected Code in Flash—This field displays the version of code that is currently stored in FLASHmemory on the switch. This code will execute after the switch is reset. If the switch is not present andthe data is from pre-configuration, then the code version is “None”.Serial Number—Serial number of the switch.Up Time—This field displays the system up time.RelatedCommandsshow supported switchtypeThis command displays information about the switch types supported by the installed version ofSFTOS.Syntax show supported switchtype [switchindex]The switchindex variable is the switch index of the switch model for which you want details. The IDis listed in the SID field of the show supported switchtype report, as shown in Figure 12-80.Mode User Exec; Privileged ExecExample 1 Figure 12-80. Sample Output from the show supported switchtype CommandReport Fields When the switchindex variable is not entered, the report fields are as follows:Switch Index (SID)—This field displays the index into the database of supported switch types. Thisindex is used when preconfiguring a member to be added to the stack.show hardware Display inventory information for the switch.show sysinfo Display switch information.show tech-support Display a compilation of many “show” commands.show version Display details of the software/hardware present on the systemForce10-S50 #show supported switchtypeMgmt CodeSID Switch Model ID Pref Type--- -------------------------------- ------------ ---------1 S50-01-GE-48T-V 1 0x100b0002 S50-01-GE-48T 1 0x100b0003 S25-01-GE-24P 1 0x100b000
