System Management Commands | 47Table 5-4. Fields in the Output of the show hardware CommandRelatedCommandsshow interfaceThis command displays a summary of statistics for a specific port or for the entire switch, dependingon the argument.Syntax show interface {unit/slot/port | ethernet {switchport | unit/slot/port | 1-3965} | loopback |managementethernet | switchport}ParametersMode Privileged ExecCommandHistoryField DescriptionSwitch Description Text used to identify the product name of this switchVendor ID Number used to identify the manufacturer of the devicePlant IDCountry CodeDate Code Month and year of manufacture of the switchSerial Number The unique box serial number for this switchPart Number Manufacturing part numberRevisionCatalog Number The catalog number of the switchBurned in MAC Address Universally assigned network addressSoftware Version The version of the SFTOS software currently running on the switch, expressed asbase release.version.revision.Additional Packages The software modules that are incorporated into this version of SFTOSshow cx4-cable-length Displays CX4 cable lengths connected to the system.show tech-support Displays the output of many show commands, including this one.unit/slot/port ,Enter the port number of a particular port to query, where unit is the stackmember, slot is always 0 (zero), and port is the port number. The displayparameters are shown below.ethernet {switchport |unit/slot/port | 1-3965}See show interface ethernet on page 50.loopback See show interface loopback on page 99.managementethernet See show interface managementethernet on page 57.switchport Enter the keyword to display a summary of statistics on Layer 2 interfaces.See show interface switchport on page 59.Version 2.5.1 Modified: Added port channel options and Native VLAN information to VLAN output.Many report fields changed.
