RIP Commands | 455show ip rip interface briefThis command displays general information for each RIP interface. For this command to displaysuccessful results routing must be enabled per interface (i.e. ip rip).Syntax show ip rip interface briefMode Privileged Exec and User ExecUnit/Slot/Port—Valid unit, slot and port number separated by forward slashes.IP Address—The IP source address used by the specified RIP interface.Send Version—The RIP version(s) used when sending updates on the specified interface. The typesare none, RIP-1, RIP-1c, RIP-2.Receive Version—The RIP version(s) allowed when receiving updates from the specified interface. Thetypes are none, RIP-1, RIP-2, BothRIP Mode—RIP administrative mode of router RIP operation; enable activates, disable de-activates it.Link State—The mode of the interface (up or down).show ip rip interfaceThis command displays information related to a particular RIP interface.Syntax show ip rip interface <unit/slot/port>Mode Privileged Exec and User ExecInterface—Valid unit, slot and port number separated by forward slashes. This is a configured value.IP Address—The IP source address used by the specified RIP interface. This is a configured value.Send version—The RIP version(s) used when sending updates on the specified interface. The types arenone, RIP-1, RIP-1c, RIP-2. This is a configured value.Receive version—The RIP version(s) allowed when receiving updates from the specified interface. Thetypes are none, RIP-1, RIP-2, Both. This is a configured value.Both RIP Admin Mode—RIP administrative mode of router RIP operation; enable activates, disablede-activates it. This is a configured value.Link State—Indicates whether the RIP interface is up or down. This is a configured value.Authentication Type—The RIP Authentication Type for the specified interface. The types are none,simple, and encrypt. This is a configured value.Default Metric—A number which represents the metric used for default routes in RIP updates originatedon the specified interface. This is a configured value.The following information will be invalid if the link state is down.
