488 | PIM Commandsw w w . d e l l . c o m | s u p p o r t . d e l l . c o mshow ip pimdm neighborThis command displays the neighbor information for PIM-DM on the specified interface.Syntax show ip pimdm neighbor {unit/slot/port | all}The no version of this commandMode Privileged Exec and User ExecNeighbor Address—This field displays the IP Address of the neighbor on an interface.Interface—Valid unit, slot and port number separated by forward slashes.Up Time—This field indicates the time since this neighbor has become active on this interface.Expiry Time—This field indicates the expiry time of the neighbor on this interface.PIM-SM CommandsThis section provides a detailed explanation of the Protocol Independent Multicast - Sparse Mode(PIM-SM) commands in SFTOS. The commands are:• ip pimsm cbsrpreference on page 489• ip pimsm cbsrhashmasklength on page 489• ip pimsm crppreference on page 490• ip pimsm datathreshrate on page 490• ip pimsm message-interval on page 490• ip pimsm on page 491• ip pimsm mode on page 491• ip pimsm query-interval on page 492• ip pimsm spt-threshold on page 492• ip pim-trapflags on page 492• ip pimsm staticrp on page 493• show ip pimsm rphash on page 493• show ip pimsm staticrp on page 493• show ip pimsm on page 493• show ip pimsm candrptable on page 494• show ip pimsm componenttable on page 494• show ip pimsm interface on page 495• show ip pimsm interface stats on page 495• show ip pimsm neighbor on page 496• show ip pimsm rp on page 497• show ip pimsm rphash on page 497