GARP Commands | 259set gmrp interfacemode allCommandHistoryshow gmrp configurationThis command displays GARP Multicast Registration Protocol information for one or all interfaces.Syntax show gmrp configuration {unit/slot/port | all}Mode Privileged Exec and User ExecExample Figure 15-91. Example of show gmrp configuration CommandFieldDescriptionsInterface—This displays the unit/slot/port of the interface that is described in this row of thetable.Join Timer—Specifies the interval between the transmission of GARP PDUs registering (orre-registering) membership for an attribute. Current attributes are a VLAN or multicast group. There isan instance of this timer on a per-Port, per-GARP participant basis. Permissible values are 10 to 100centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds (0.2 seconds). The finestgranularity of specification is 1 centisecond (0.01 seconds).Leave Timer—Specifies the period of time to wait after receiving an unregister request for an attributebefore deleting the attribute. Current attributes are a VLAN or multicast group. This may be considereda buffer time for another station to assert registration for the same attribute in order to maintainuninterrupted service. There is an instance of this timer on a per-Port, per-GARP participant basis.Permissible values are 20 to 600 centiseconds (0.2 to 6.0 seconds). The factory default is 60centiseconds (0.6 seconds). The finest granularity of specification is 1 centisecond (0.01 seconds).LeaveAll Timer—This Leave All Time controls how frequently LeaveAll PDUs are generated. A LeaveAllPDU indicates that all registrations will shortly be deregistered. Participants will need to rejoin in order tomaintain registration. There is an instance of this timer on a per-Port, per-GARP participant basis. TheLeave All Period Timer is set to a random value in the range of LeaveAllTime to 1.5*LeaveAllTime.Permissible values are 200 to 6000 centiseconds (2 to 60 seconds). The factory default is 1000centiseconds (10 seconds). The finest granularity of specification is 1 centisecond (0.01 seconds).Version 2.3 Changed to gmrp interfacemode enable all.Force10 #show gmrp configuration 1/0/1Join Leave LeaveAll PortInterface Timer Timer Timer GMRP Mode(centisecs) (centisecs) (centisecs)----------- ----------- ----------- ----------- -----------1/0/1 20 60 1000 DisabledForce10-S50 #show gmrp configuration allJoin Leave LeaveAll PortInterface Timer Timer Timer GMRP Mode(centisecs) (centisecs) (centisecs)----------- ----------- ----------- ----------- -----------1/0/1 20 60 1000 Disabled1/0/2 20 60 1000 Disabled1/0/3 20 60 1000 Disabled1/0/4 20 60 1000 Disabled1/0/5 20 60 1000 Disabled1/0/6 20 60 1000 Disabled1/0/7 20 60 1000 Disabled1/0/8 20 60 1000 Disabled!----------------output truncated---------------------!
