228 | Stacking Commandsw w w . d e l l . c o m | s u p p o r t . d e l l . c o m Example 1 Figure 12-83. Using the show supported cardtype Command on an S50Example 2 Figure 12-84. Using the show supported cardtype Command on an S50VReport Fields When cardindex is not specified, the fields are:CID—CID stands for Card Index. This field displays the card index numbers of device types supportedby the installed software. This index is used when preconfiguring a slot.Card Model ID—This field displays the model ID for the supported device.When cardindex is specified (not supported on the S50), the fields are:Card Type—This field displays the 32-bit numeric card type for the supported device.Model Identifier—This field displays the model identifier for the supported device.Card Description—This field displays the description for the supported device.RelatedCommandsForce10-S50 #show supported cardtypeCID Card Model ID--- --------------------------------2 SA-01-10GE-2P <========= catalog # of Force10 10G XFP fiber module for S503 SA-01-GE-48T <========== catalog # of S50 model switchForce10-S50#show supported cardtype 3Card Type......................... 0x56304002Model Identifier.................. S50-01-GE-48TCard Description.................. Force10 S50E - 48 GE, 4 TENGIGForce10-S50 #show supported cardtypeCID Card Model ID--- --------------------------------3 S50-01-GE-48T <========== catalog # of S50 model switch4 S50-01-GE-48T-V <======== catalog # of S50V model switch5 S25-01-GE-24P <========== catalog # of S25P model switch6 S50-01-10GE-2P <========= catalog # of 10G XFP fiber module for S50V and S25P7 S50-01-10GE-2C <========= catalog # of CX4 module for S50V and S25P8 S50-01-12G-2S <========= catalog # of 12G stacking module for S50V and S25P9 S50-01-24G-1S <========= catalog # of 24G stacking module for S50V and S25PForce10-S50V#show supported cardtype 6Card Type......................... 0x563042f2Model Identifier.................. Force10 48 Ten-Gig CardCard Description.................. Force10 48 10GB Cardshow supported switchtype Displays the switch index (SID) of supported switchesstack Accesses the Stacking Config mode
