Security Commands | 195Mode Privileged ExecReport Fields If none of the optional parameters are used, the global dot1x configuration summary is displayed, asfollows:Administrative mode—Indicates whether authentication control on the switch is enabled or disabled.If the optional parameter detail unit/slot/port is used, the detailed dot1x configuration for thespecified port are displayed, as follows:Example Figure 11-67. Example of Output from the show dot1x detail CommandPort—The interface whose configuration is displayedProtocol Version—The protocol version associated with this port. The only possible value is 1,corresponding to the first version of the dot1x specification.PAE Capabilities—The port access entity (PAE) functionality of this port. Possible values areAuthenticator or Supplicant.Authenticator PAE State—Current state of the authenticator PAE state machine. Possible values areInitialize, Disconnected, Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuthorized,and ForceUnauthorized.Backend Authentication State—Current state of the backend authentication state machine. Possiblevalues are Request, Response, Success, Fail, Timeout, Idle, and Initialize.Quiet Period—The timer used by the authenticator state machine on this port to define periods of time inwhich it will not attempt to acquire a supplicant. The value is expressed in seconds and will be in therange 0 and 65535.Transmit Period—The timer used by the authenticator state machine on the specified port to determinewhen to send an EAPOL EAP Request/Identity frame to the supplicant. The value is expressed inseconds and will be in the range of 1 and 65535.Supplicant Timeout—The timer used by the authenticator state machine on this port to timeout thesupplicant. The value is expressed in seconds and will be in the range of 1 and 65535.Server Timeout—The timer used by the authenticator on this port to timeout the authentication server.The value is expressed in seconds and will be in the range of 1 and 65535.Maximum Requests—The maximum number of times the authenticator state machine on this port willretransmit an EAPOL EAP Request/Identity before timing out the supplicant. The value will be in therange of 1 and 10.Reauthentication Period—The timer used by the authenticator state machine on this port to determinewhen reauthentication of the supplicant takes place. The value is expressed in seconds and will be inthe range of 1 and 65535.Force10 #show dot1x detail 1/0/1Port........................................... 1/0/1Protocol Version............................... 1PAE Capabilities............................... AuthenticatorAuthenticator PAE State........................ InitializeBackend Authentication State................... InitializeQuiet Period................................... 60Transmit Period................................ 30Supplicant Timeout............................. 30Server Timeout (secs).......................... 30Maximum Requests............................... 2Reauthentication Period........................ 3600Reauthentication Enabled....................... FALSEKey Transmission Enabled....................... FALSEControl Direction.............................. both
