50 | System Management Commandsw w w . d e l l . c o m | s u p p o r t . d e l l . c o mshow interface ethernetThis command displays detailed statistics for a specific port or for all CPU traffic based upon theargument.Syntax show interface ethernet {switchport | unit/slot/port | 1-3965}ParametersMode Privileged ExecCommandHistoryUsageInformationThis command displays distinctly different reports, depending on the entered parameter.Figure 5-12 shows an example of the show interface ethernet report when the keywordswitchport is added. Table 5-7 on page 51 contains an explanation of the report fields.Figure 5-13 shows an example of the show interface ethernet report when the argument is unit/slot/port. Table 5-8 on page 52 contains an explanation of the report fields.show interfacemanagementethernetDisplays information about the management interface to the switch.show interfaces port-channel Displays detailed statistics for a specific LAG or summary information for allLAGs, based upon the argument.show ip interface Displays summary information about IP configuration settings for all ports inthe router.show interfaces Displays information about a selected interface or VLANswitchport The display parameters for when switchport is entered, are shown belowthe list for unit/slot/port.unit/slot/port ,Valid unit, slot and, port number, separated by forward slashes. The displayparameters are shown below.1-3965 VLAN IDVersion 2.5.1 Modified: Many report fields changed
