462 | IP Multicast Commandsw w w . d e l l . c o m | s u p p o r t . d e l l . c o mshow ip mcast boundaryThis command displays all the configured administrative scoped multicast boundaries.Syntax show ip mcast boundary {unit/slot/port | all}Mode Privileged Exec and User ExecReport Fields Unit/Slot/Port—Valid unit, slot and port number separated by forward slashes.Group Ip—The group IP addressMask—The group IP maskshow ip mcast interfaceThis command displays the multicast information for the specified interface.Syntax show ip mcast interface unit/slot/portMode Privileged Exec and User ExecReport Fields Unit/Slot/Port—Valid unit, slot and port number separated by forward slashes.TTL—This field displays the time-to-live value for this interface.show ip mcast mrouteThis command displays a summary or all the details of the multicast table.Syntax show ip mcast mroute {detail | summary}Mode Privileged Exec and User ExecReport Fields If the “detail” parameter is specified, the following fields are displayed:Source IP Addr—This field displays the IP address of the multicast data source.Group IP Addr—This field displays the IP address of the destination of the multicast packet.Expiry Time—This field displays the time of expiry of this entry in seconds.Up Time—This field displays the time elapsed since the entry was created in seconds.RPF Neighbor—This field displays the IP address of the RPF neighbor.Flags—This field displays the flags associated with this entry.If the “summary” parameter is specified, the following fields are displayed:Source IP Addr—This field displays the IP address of the multicast data source.
