System Configuration Commands | 117ParametersDefaults no descriptionMode Interface Config; Interface Range EthernetCommandHistoryRelatedCommandsshow inlinepower (stack)This command shows the status for all switches in a stack that support PoE.Syntax show inlinepowerCommand Modes User Exec; Privileged ExecCommandHistoryExample Figure 6-37. Example Output of show inlinepower Command for a StackTable 6-17 defines the fields displayed in Figure 6-37.RelatedCommandstype-string Enter an alphanumeric description.Version 2.5.1 Introducedshow inlinepower (stack) Display PoE status of stack members.show inlinepower Display PoE status of designated port.Version 2.5.1 IntroducedTable 6-17. show interfaces description Command Example FieldsField DescriptionUnit The stack member IDsStatus Whether PoE from the switch is enabled (“Auto”) or disabled (Off)Power(W) The total PoE power budget in watts allotted for the switchConsumption(W) The current PoE power usage in watts for the switchUsage(%) The percentage of PoE power used by the switch of the allotted amountThreshold(%) The allotted percentage of the power that could be made availableTrap Whether PoE SNMP traps are enabled or disabledForce10-S50V >show inlinepowerUnit Status Power(W) Consumption(W) Usage(%) Threshold(%) Trap---- ------ -------- -------------- -------- ------------ ----1 Auto 360 22 6.11 100 enableinlinepower Enable or disable PoE for the switch.
