Routing Commands | 419show ip vrrp interface statsThis command displays the statistical information about each virtual router configured on the SFTOSswitch.Syntax show ip vrrp interface stats unit/slot/port vrIDMode Privileged Exec and User ExecIs the time that the virtual router has been up, in days, hours, minutes and seconds.Report Fields State Transitioned to Master—Represents the total number of times virtual router state has changed toMASTER.Advertisement Received—Represents the total number of VRRP advertisements received by this virtualrouter.Advertisement Interval Errors—Represents the total number of VRRP advertisements received forwhich advertisement interval is different than the configured value for this virtual router.Authentication Failure—Represents the total number of VRRP packets received that don't pass theauthentication check.IP TTL errors—Represents the total number of VRRP packets received by the virtual router with IP TTL(time to live) not equal to 255.Zero Priority Packets Received—Represents the total number of VRRP packets received by virtualrouter with a priority of '0'.Zero Priority Packets Sent—Represents the total number of VRRP packets sent by the virtual routerwith a priority of '0'.Invalid Type Packets Received—Represents the total number of VRRP packets received by the virtualrouter with invalid 'type' field.Address List Errors—Represents the total number of VRRP packets received for which address listdoes not match the locally configured list for the virtual router.Invalid Authentication Type—Represents the total number of VRRP packets received with unknownauthentication type.Authentication Type Mismatch—Represents the total number of VRRP advertisements received forwhich 'auth type' not equal to locally configured one for this virtual router.Packet Length Errors—Represents the total number of VRRP packets received with packet length lessthan length of VRRP headerinterface vlan Creates a VLAN and assigns it an ID, and then enters the Interface VLAN mode, whichprovides access to VLAN configuration commands for the specified VLAN.ip vrrp Sets the VRID (virtual router ID) on an interface for virtual router configuration in therouter. This command also has options.
