414 | Routing Commandsw w w . d e l l . c o m | s u p p o r t . d e l l . c o m VLAN ID—Is the identifier of the VLAN.Logical Interface—Indicates the logical unit/slot/port associated with the VLAN routing interface.IP Address—Displays the IP Address associated with this VLAN.Subnet Mask—Indicates the subnet mask that is associated with this VLAN.vlan routingCommandHistoryVirtual Router Redundancy Protocol (VRRP) CommandsThis section provides a detailed explanation of the VRRP commands. The commands are divided byfunctionality into the following different groups:• Show commands are used to display switch settings, statistics and other information.• Configuration Commands are used to configure features and options of the switch. For everyconfiguration command there is a show command that will display the configuration setting.The commands in this section are, in order:• ip vrrp (global) on page 414• ip vrrp on page 415• ip vrrp authentication on page 415• ip vrrp ip on page 416• ip vrrp mode on page 416• ip vrrp preempt on page 417• ip vrrp priority on page 418• ip vrrp timers advertise on page 418• show ip vrrp interface stats on page 419• show ip vrrp on page 420• show ip vrrp interface on page 420• show ip vrrp interface brief on page 420ip vrrp (global)This command enables the administrative mode of VRRP in the router. This command also designatesthe configured virtual router IP address as a secondary IP address on an interface.The no version of this command disables the default administrative mode of VRRP in the router.Syntax [no] ip vrrpVersion 2.3 Deprecated. Replaced by ip address (VLAN).RelatedCommandsip address (VLAN) Assigns an IP address and subnet mask to the selected VLAN.
