214 | Security Commandsw w w . d e l l . c o m | s u p p o r t . d e l l . c o m Mode Global ConfigCommandHistoryip http secure-server enableThis command is used to enable the secure socket layer for secure HTTP.The no version of this command is used to disable the secure socket layer for secure HTTP.Syntax [no] ip http secure-server enableDefault disabledMode Global ConfigCommandHistoryip http server enableThis command enables access to the switch through the Web User Interface (Web UI) of SFTOS. Whenaccess is enabled, the user can log in to the switch from the Web UI.Syntax [no] ip http server enableUse no ip http server enable to disable access to the switch through the Web UI. When access isdisabled, the user cannot login to the switch's Web server. Disabling the Web UI takes effectimmediately. All interfaces are affected.Default enabledMode Global ConfigCommandHistoryVersion 2.5.1 Unsupported: The SFTOS Web UI is not supported in v. 2.5.1 or 2.5.2.Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.Note: This command requires keys/certificates to be generated offline before the servicewill start. See s50-secure-management.pdf at (log-in required):https://www.force10networks.com/csportal20/KnowledgeBase/Documentation.aspxVersion 2.5.1 Unsupported: The SFTOS Web UI is not supported in v. 2.5.1 or 2.5.2.Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode and addedenable to the command.Version 2.5.1 Unsupported: The SFTOS Web UI is not supported in v. 2.5.1 or 2.5.2.Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode and addedenable to the command.RelatedCommandsip address (management) Configures the IP address of the management interface.
