You can create a logical network by creating a logical switch. The logical network acts as the forwarding domain for workloads on thephysical as well as virtual infrastructure.Figure 154. Create Logical Switch5 Create Logical Switch PortA logical switch port provides a logical connection point for a VM interface (VIF) and a L2 gateway connection to an external network.It binds the virtual access ports in the GW to logical network (VXLAN) and VLAN.Figure 155. Create Logical Switch PortNOTE: For more details about NVP controller configuration, refer to the NVP user guide fromVMWare .Configuring VxLAN GatewayTo configure the VxLAN gateway on the switch, follow these steps:1 Connecting to NVP controller2 Advertising VXLAN access ports to controllerConnecting to an NVP ControllerTo connect to an NVP controller, use the following commands.1 feature vxlanCONFIGURATION modefeature vxlanYou must configure feature VXLAN to configure vxlan-instance.2 vxlan-instanceCONFIGURATION mode1058 Virtual Extensible LAN (VXLAN)
