00:54:38: %RPM0-P:RP2 %BFDMGR-1-BFD_STATE_CHANGE: Changed session state to Up for neighbor2.2.2.2on interface Te 4/24 (diag: 0)The following example shows hexadecimal output from the debug bfd packet command.RX packet dump:20 c0 03 18 00 00 00 05 00 00 00 04 00 01 86 a000 01 86 a0 00 00 00 0000:34:13 : Sent packet for session with neighbor 2.2.2.2 on Te 4/24TX packet dump:20 c0 03 18 00 00 00 04 00 00 00 05 00 01 86 a000 01 86 a0 00 00 00 0000:34:14 : Received packet for session with neighbor 2.2.2.2 on Te 4/24RX packet dump:20 c0 03 18 00 00 00 05 00 00 00 04 00 01 86 a000 01 86 a0 00 00 00 0000:34:14 : Sent packet for session with neighbor 2.2.2.2 on Te 4/24TX packet dump:20 c0 03 18 00 00 00 04 00 00 00 05 00 01 86 a000 01 86 a0 00 00 00 0000:34:14 : Received packet for session with neighbor 2.2.2.2 on Te 4/24RX packet dump:20 c0 03 18 00 00 00 05 00 00 00 04 00 01 86 a000 01 86 a0 00 00 00 0000:34:14 : Sent packet for session with neighbor 2.2.2.2 on Te 4/24LThe output for the debug bfd event command is the same as the log messages that appear on the console by default.Bidirectional Forwarding Detection (BFD) 175
