• Each position in the 8-character string is for one port, starting with Port 1 at the left end of the string, and ending with Port 8 at theright end. A 0 indicates that the port is not a member of the VLAN; a 1 indicates VLAN membership.All hex pairs are 00, indicating that no ports are assigned to VLAN 10. In the following example, Port 0/2 is added to VLAN 10 as untagged;the first hex pair changes from 00 to 04.The following example shows viewing VLAN ports using SNMP with ports assigned.[Dell Networking OS system output]R5(conf)#do show vlan id 10Codes: * - Default VLAN, G - GVRP VLANsQ: U - Untagged, T - Taggedx - Dot1x untagged, X - Dot1x taggedG - GVRP tagged, M - Vlan-stackNUM Status Description Q Ports10 Inactive U Te 1/2[Unix system output]> snmpget -v2c -c mycommunity 10.11.131.185 .1.3.6.1.2.1.17.7.1.4.3.1.2.1107787786SNMPv2-SMI::mib-2.17.7.1.4.3.1.2.1107787786 = Hex-STRING: 40 00 00 00 00 00 00 00 00 00 00The value 40 is in the first set of 7 hex pairs, indicating that these ports are in Stack Unit 1. The hex value 40 is 0100 0000 in binary. Asdescribed, the left-most position in the string represents Port 1. The next position from the left represents Port 2 and has a value of 1,indicating that Port 1/2 is in VLAN 10. The remaining positions are 0, so those ports are not in the VLAN.NOTE: The table contains none of the other information the command provides, such as port speed or whether the ports aretagged or untagged.Add Tagged and Untagged Ports to a VLANThe value dot1qVlanStaticEgressPorts object is an array of all VLAN members.The dot1qVlanStaticUntaggedPorts object is an array of only untagged VLAN members. All VLAN members that are not indot1qVlanStaticUntaggedPorts are tagged.• To add a tagged port to a VLAN, write the port to the dot1qVlanStaticEgressPorts object.• To add an untagged port to a VLAN, write the port to the dot1qVlanStaticEgressPorts and dot1qVlanStaticUntaggedPorts objects.NOTE: Whether adding a tagged or untagged port, specify values for both dot1qVlanStaticEgressPorts anddot1qVlanStaticUntaggedPorts.Example of Adding an Untagged Port to a VLAN using SNMPIn the following example, Port 0/2 is added as an untagged member of VLAN 10.>snmpset -v2c -c mycommunity 10.11.131.185 .1.3.6.1.2.1.17.7.1.4.3.1.2.1107787786 x "40 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00".1.3.6.1.2.1.17.7.1.4.3.1.4.1107787786 x "40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00"SNMPv2-SMI::mib-2.17.7.1.4.3.1.2.1107787786 = Hex-STRING: 40 00 00 00 00 00 00 00 00 00 0000 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00SNMPv2-SMI::mib-2.17.7.1.4.3.1.4.1107787786 = Hex-STRING: 40 00 00 00 00 00 00 00 00 00 0000 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00Simple Network Management Protocol (SNMP) 887
