Dell(config-as-path)#deny 32$Dell(config-as-path)#exDell(conf)#router bgp 99Dell(conf-router_bgp)#neighbor AAA filter-list Eagle inDell(conf-router_bgp)#show conf!router bgp 99neighbor AAA peer-groupneighbor AAA filter-list Eagleinneighbor AAA no shutdownneighbor 10.155.15.2 remote-as 32neighbor 10.155.15.2 filter-list 1 inneighbor 10.155.15.2 shutdownDell(conf-router_bgp)#exDell(conf)#exDell#show ip as-path-access-listsip as-path access-list Eagledeny 32$Dell#Redistributing RoutesIn addition to filtering routes, you can add routes from other routing instances or protocols to the BGP process. With the redistributecommand, you can include ISIS, OSPF, static, or directly connected routes in the BGP process.To add routes from other routing instances or protocols, use any of the following commands in ROUTER BGP mode.• Include, directly connected or user-configured (static) routes in BGP.ROUTER BGP or CONF-ROUTER_BGPv6_ AF moderedistribute {connected | static} [route-map map-name]Configure the map-name parameter to specify the name of a configured route map.• Include specific ISIS routes in BGP.ROUTER BGP or CONF-ROUTER_BGPv6_ AF moderedistribute isis [level-1 | level-1-2 | level-2] [metric value] [route-map map-name]Configure the following parameters:• level-1, level-1-2, or level-2: Assign all redistributed routes to a level. The default is level-2.• metric value: The value is from 0 to 16777215. The default is 0.• map-name: name of a configured route map.• Include specific OSPF routes in IS-IS.ROUTER BGP or CONF-ROUTER_BGPv6_ AF moderedistribute ospf process-id [match external {1 | 2} | match internal] [metric-type {external| internal}] [route-map map-name]Configure the following parameters:• process-id: the range is from 1 to 65535.• match external: the range is from 1 or 2.• match internal• metric-type: external or internal.• map-name: name of a configured route map.Border Gateway Protocol IPv4 (BGPv4) 207
