Table 103. MIB Objects for Viewing the System Image on Flash PartitionsMIB Object OID Description MIBchSysSwInPartitionAImgVers 1.3.6.1.4.1.6027.3.10.1.2.8.1.11 List the version string of thesystem image in Flash PartitionA.Chassis MIBchSysSwInPartitionBImgVers 1.3.6.1.4.1.6027.3.10.1.2.8.1.12 List the version string of thesystem image in Flash PartitionB.Chassis MIBThe system image can also be retrieved by performing an SNMP walk on the following OID: MIB Object is chSysSwModuleTable and theOID is 1.3.6.1.4.1.6027.3.10.1.2.8.Dell#show interface Tengigabitethernet 1/21TenGigabitEthernet 1/21 is up, line protocol is upMonitor Port-ChannelsTo check the status of a Layer 2 port-channel, use f10LinkAggMib (.1.3.6.1.4.1.6027.3.2). In the following example, Po 1 is a switchport and Po2 is in Layer 3 mode.Example of SNMP Trap for Monitored Port-Channels[senthilnathan@lithium ~]$ snmpwalk -v 2c -c public 10.11.1.1 .1.3.6.1.4.1.6027.3.2.1.1SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.1.1 = INTEGER: 1SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.1.2 = INTEGER: 2SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.2.1 = Hex-STRING: 00 01 E8 13 A5 C7SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.2.2 = Hex-STRING: 00 01 E8 13 A5 C8SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.3.1 = INTEGER: 1107755009SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.3.2 = INTEGER: 1107755010SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.4.1 = INTEGER: 1SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.4.2 = INTEGER: 1SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.5.1 = Hex-STRING: 00 00SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.5.2 = Hex-STRING: 00 00SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.6.1 = STRING: "Gi 5/84 " << Channel member for Po1SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.6.2 = STRING: "Gi 5/85 " << Channel member for Po2dot3aCommonAggFdbIndexSNMPv2-SMI::enterprises.6027.3.2.1.1.6.1.1.1107755009.1 = INTEGER: 1107755009dot3aCommonAggFdbVlanIdSNMPv2-SMI::enterprises.6027.3.2.1.1.6.1.2.1107755009.1 = INTEGER: 1dot3aCommonAggFdbTagConfigSNMPv2-SMI::enterprises.6027.3.2.1.1.6.1.3.1107755009.1 = INTEGER: 2 (Tagged 1 or Untagged 2)dot3aCommonAggFdbStatusSNMPv2-SMI::enterprises.6027.3.2.1.1.6.1.4.1107755009.1 = INTEGER: 1 << Status active, 2 –status inactiveExample of Viewing Status of Learned MAC AddressesIf we learn MAC addresses for the LAG, status is shown for those as well.dot3aCurAggVlanIdSNMPv2-SMI::enterprises.6027.3.2.1.1.4.1.1.1.0.0.0.0.0.1.1 = INTEGER: 1dot3aCurAggMacAddrSNMPv2-SMI::enterprises.6027.3.2.1.1.4.1.2.1.0.0.0.0.0.1.1 = Hex-STRING: 00 00 00 00 00 01dot3aCurAggIndexSNMPv2-SMI::enterprises.6027.3.2.1.1.4.1.3.1.0.0.0.0.0.1.1 = INTEGER: 1dot3aCurAggStatusSNMPv2-SMI::enterprises.6027.3.2.1.1.4.1.4.1.0.0.0.0.0.1.1 = INTEGER: 1 << Status active, 2 –statusinactiveSimple Network Management Protocol (SNMP) 891
