If you do not use the all keyword, the next hop of only eBGP-learned routes is updated by the route reflector. If you use the allkeyword, the next hop of both eBGP- and iBGP-learned routes are updated by the route reflector.• Sets the next hop address.CONFIG-ROUTE-MAP modeset next-hop ip-addressIf the set next-hop command is applied on the out-bound interface using a route map, it takes precedence over the neighbornext-hop-self command.Changing the WEIGHT AttributeTo change how the WEIGHT attribute is used, enter the first command. You can also use route maps to change this and other BGPattributes. For example, you can include the second command in a route map to specify the next hop address.• Assign a weight to the neighbor connection.CONFIG-ROUTER-BGP modeneighbor {ip-address | peer-group-name} weight weight• weight: the range is from 0 to 65535.The default is 0.• Sets weight for the route.CONFIG-ROUTE-MAP modeset weight weight• weight: the range is from 0 to 65535.To view BGP configuration, use the show config command in CONFIGURATION ROUTER BGP mode or the show running-config bgp command in EXEC Privilege mode.Enabling MultipathBy default, the software allows one path to a destination. You can enable multipath to allow up to 64 parallel paths to a destination.NOTE: Dell Networking recommendsnot using multipath and add path simultaneously in a route reflector.To allow more than one path, use the following command.The show ip bgp network command includes multipath information for that network.• Enable multiple parallel paths.CONFIG-ROUTER-BGP modemaximum-paths {ebgp | ibgp} numberFiltering BGP RoutesFiltering routes allows you to implement BGP policies.You can use either IP prefix lists, route maps, AS-PATH ACLs or IP community lists (using a route map) to control which routes the BGPneighbor or peer group accepts and advertises. Prefix lists filter routes based on route and prefix length, while AS-Path ACLs filter routesbased on the ASN. Route maps can filter and set conditions, change attributes, and assign update policies.214 Border Gateway Protocol IPv4 (BGPv4)
