.1.3.6.1.2.1.47.1.3.2.1.2.17.0 = OID: .1.3.6.1.2.1.2.2.1.1.2098693.1.3.6.1.2.1.47.1.3.2.1.2.21.0 = OID: .1.3.6.1.2.1.2.2.1.1.2099205.1.3.6.1.2.1.47.1.3.2.1.2.25.0 = OID: .1.3.6.1.2.1.2.2.1.1.2099717.1.3.6.1.2.1.47.1.3.2.1.2.29.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100228.1.3.6.1.2.1.47.1.3.2.1.2.30.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100356.1.3.6.1.2.1.47.1.3.2.1.2.31.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100484MIB Support for LAGDell Networking provides a method to retrieve the configured LACP information (Actor and Partner). Actor (local interface) is to designatethe parameters and flags pertaining to the sending node, while the term Partner (remote interface) is to designate the sending node’s viewof its peer parameters and flags. LACP provides a standardized means for exchanging information, with partner systems, to form a linkaggregation group (LAG). The following table lists the related MIB objects:Table 101. MIB Objects for LAGMIB Object OID DescriptionlagMIB 1.2.840.10006.300.43 Contains information about link aggregationmodule for managing 802.3ad.lagMIBObjects 1.2.840.10006.300.43.1dot3adAgg 1.2.840.10006.300.43.1.1dot3adAggTable 1.2.840.10006.300.43.1.1.1 Contains information about everyAggregator that is associated with a system.dot3adAggEntry 1.2.840.10006.300.43.1.1.1.1 Contains a list of Aggregator parameters andindexed by the ifIndex of the Aggregator.dot3adAggMACAddress 1.2.840.10006.300.43.1.1.1.1.1 Contains a six octet read–only value carryingthe individual MAC address assigned to theAggregator.dot3adAggActorSystemPriority 1.2.840.10006.300.43.1.1.1.1.2 Contains a two octet read–write valueindicating the priority value associated withthe Actor’s system ID.dot3adAggActorSystemID 1.2.840.10006.300.43.1.1.1.1.3 Contains a six octet read–write MACaddress value used as a unique identifier forthe system that contains the Aggregator.dot3adAggAggregateOrIndividual 1.2.840.10006.300.43.1.1.1.1.4 Contains a read–only boolean value (True orFalse) indicating whether the Aggregatorrepresents an Aggregate or an Individual link.dot3adAggActorAdminKey 1.2.840.10006.300.43.1.1.1.1.5 Contains a 16–bit read–write value which isthe current administrative key.dot3adAggActorOperKey 1.2.840.10006.300.43.1.1.1.1.6 Contains a 16–bit read–write value which isthe operational key.dot3adAggPartnerSystemID 1.2.840.10006.300.43.1.1.1.1.7 Contains a six octet read–only MAC addressvalue consisting of an unique identifier forthe current Protocol partner of theAggregator.dot3adAggPartnerSystemPriority 1.2.840.10006.300.43.1.1.1.1.8 Contains a two octet read–only value thatindicates the priority value associated withthe Partner’s system ID.884 Simple Network Management Protocol (SNMP)
