prefix-list List IPv6 prefix listsroute IPv6 routing informationrpf RPF tableDell#Displaying an IPv6 Interface InformationTo view the IPv6 configuration for a specific interface, use the following command.• Show the currently running configuration for the specified interface.EXEC modeshow ipv6 interface interface {slot/port}Enter the keyword interface then the type of interface and slot/port information:• For all brief summary of IPv6 status and configuration, enter the keyword brief.• For all IPv6 configured interfaces, enter the keyword configured.• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port[/subport] information.• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.• For a Loopback interface, enter the keyword loopback then a number from 0 to 16383.• For a port channel interface, enter the keywords port-channel then a number.• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.Example of the show ipv6 interface CommandDell#show ipv6 int ManagementEthernet 1/1ManagementEthernet 1/1 is up, line protocol is upIPV6 is enabledStateless address autoconfiguration is enabledLink Local address: fe80::201:e8ff:fe8b:386eGlobal Unicast address(es):Actual address is 400::201:e8ff:fe8b:386e, subnet is 400::/64Actual address is 412::201:e8ff:fe8b:386e, subnet is 412::/64Virtual-IP IPv6 address is not setReceived Prefix(es):400::/64 onlink autoconfigValid lifetime: 2592000, Preferred lifetime: 604800Advertised by: fe80::201:e8ff:fe8b:3166412::/64 onlink autoconfigValid lifetime: 2592000, Preferred lifetime: 604800Advertised by: fe80::201:e8ff:fe8b:3166Global Anycast address(es):Joined Group address(es):ff02::1ff02::1:ff8b:386eND MTU is 0ICMP redirects are not sentDAD is enabled, number of DAD attempts: 3ND reachable time is 32000 millisecondsND base reachable time is 30000 millisecondsND retransmit interval is 1000 millisecondsND hop limit is 64Showing IPv6 RoutesTo view the global IPv6 routing information, use the following command.• Show IPv6 routing information for the specified route type.EXEC modeIPv6 Routing 465
