CONFIGURATION modedcb-buffer-threshold dcb-buffer-threshold5 DCB-BUFFER-THRESHOLD modepriority 0 buffer-size 52 pause-threshold 16 resume-offset 10 shared-threshold-weight 76 Assign the DCB policy to the DCB buffer threshold profile.CONFIGURATION modeDell(conf)# dcb-policy buffer-threshold stack-unit all stack-ports all dcb-policy-name7 Assign the DCB policy to the DCB buffer threshold profile on interfaces. This setting takes precedence over the default buffer-threshold setting.INTERFACE mode (conf-if-te)dcb-policy buffer-threshold buffer-threshold8 Configuring Global total buffer size on stack ports.CONFIGURATION modedcb pfc-total-buffer-size buffer-size stack-unit all port-set {port-pipe |all}Port-set number range is from 0 to 3.Sample DCB ConfigurationThe following shows examples of using PFC and ETS to manage your data center traffic.In the following example:• Incoming SAN traffic is configured for priority-based flow control.• Outbound LAN, IPC, and SAN traffic is mapped into three ETS priority groups and configured for enhanced traffic selection (bandwidthallocation and scheduling).• One lossless queue is used.290 Data Center Bridging (DCB)
