3/5002:36:43: %RPM0-P:CP %IFMGR-5-OSTATE_DN: Downstream interface set to UFD error-disabled: Fo3/5102:36:43: %RPM0-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Fo 3/4902:36:43: %RPM0-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Fo 3/5002:36:43: %RPM0-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Fo 3/5102:37:29: %RPM0-P:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 1/702:37:29: %RPM0-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Te 1/702:37:29 : UFD: Group:3, UplinkState: DOWN02:37:29: %RPM0-P:CP %IFMGR-5-OSTATE_DN: Changed uplink state group state to down: Group 302:37:29: %RPM0-P:CP %IFMGR-5-OSTATE_DN: Downstream interface set to UFD error-disabled: Fo3/5202:37:29: %RPM0-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Fo 3/5202:38:31 : UFD: Group:3, UplinkState: UP02:38:31: %RPM0-P:CP %IFMGR-5-OSTATE_UP: Changed uplink state group state to up: Group 302:38:53: %RPM0-P:CP %IFMGR-5-OSTATE_UP: Downstream interface cleared from UFD error-disabled: Fo 3/4902:38:53: %RPM0-P:CP %IFMGR-5-OSTATE_UP: Downstream interface cleared from UFD error-disabled: Fo 3/5002:38:53: %RPM0-P:CP %IFMGR-5-OSTATE_UP: Downstream interface cleared from UFD error-disabled: Fo 3/5102:38:53: %RPM0-P:CP %IFMGR-5-OSTATE_UP: Downstream interface cleared from UFD error-disabled: Fo 3/5202:38:53: %RPM0-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Fo 3/4902:38:53: %RPM0-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Fo 3/5002:38:53: %RPM0-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Fo 3/5102:38:53: %RPM0-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Fo 3/52Displaying Uplink Failure DetectionTo display information on the UFD feature, use any of the following commands.• Display status information on a specified uplink-state group or all groups.EXEC modeshow uplink-state-group [group-id] [detail]• group-id: The values are from 1 to 16.• detail: displays additional status information on the upstream and downstream interfaces in each group.• Display the current status of a port or port-channel interface assigned to an uplink-state group.EXEC modeshow interfaces interfaceinterface specifies one of the following interface types:• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port[/subport] information.• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.• For a port channel interface, enter the keywords port-channel then a number.If a downstream interface in an uplink-state group is disabled (Oper Down state) by uplink-state tracking because an upstream port isdown, the message error-disabled[UFD] displays in the output.• Display the current configuration of all uplink-state groups or a specified group.EXEC mode or UPLINK-STATE-GROUP mode(For EXEC mode) show running-config uplink-state-group [group-id](For UPLINK-STATE-GROUP mode) show configuration964 Uplink Failure Detection (UFD)