TimeoutThis is the value used by the printer to time out from the current port and checkthe other ports for data to print. When the printer has not received data from thehost after a certain period of time, it needs to Timeout in order to service the otherports.v 10 Sec (the default)v 1 Sec - 60 SecReport StatusWhen this option is enabled, faults are reported even if the fault is not on thecurrent active port. If the option is disabled, a fault on the printer is reported onlyif it occurs on the active port.v Disable (the default)v EnableFraming ErrorsThese are possible errors that can occur when serial interface settings of the printerdo not match those of the host computer.v Enable (the default). If a framing error occurs, a fault message will display onthe control panel.v Disable. If a framing error occurs, a fault message will not display on thecontrol panel.142 Infoprint 6500 User’s Manual
