Config Key DefaultThis option configures the config key to print either the Quick Setup menu or thefull config.v Quick Setup Config (the default). Prints the Quick Setup configuration.v Complete Config. Prints the full configuration.Name Custom SetsYou may specify a 39-character name which can be used to refer to a custom set.The name you enter for a custom set will be used in the Recall Custom Set, SaveCurrent Values, Delete Custom Set, Change Power On Set, Protect Custom Sets,Print Custom Set Values, and Name Custom Sets menus. The name can only becleared by using the Reset Custom Set Names menu.Press the ↑ Scroll/Micro or ↓ Scroll/Micro keys to cycle through the valuesavailable for that character at the cursor location. Press the ↑ Scroll/Micro key tomove to the next character to be modified. Press the ↓ Scroll/Micro key to go backto a character you have already modified. Continue until you have entered thename you want to give to this custom set, then press ENTER to save. The nameyou entered will now represent this custom set on the printers front panel. To exitthis menu without saving, press any key other than the ENTER key. The customset name will revert to the last saved value.Reset Custom Set NamesYou can reset specific custom set names back to the default value of theconfiguration number.Chapter 4. The Configuration Menus 67
