Attaching Printer to Remote Control Unit with Twinax InterfaceiSeries auto configuration program does not support remote attached printers. Youmust manually configure this printer as a remote printer attached to a 5294, 5394,or 5494 Remote Control Unit. Use the following parameters when configuring thisprinter as a remote printer on iSeries:Parameter Description Parameter Parameter SettingDevice description DEVD Workstation printer nameDevice class DEVCLS *RMTDevice type TYPE *IPDS (When printer is set to 4234-12 mode.)Device type TYPE 4234 (When printer is set to 4234-2 mode.)Device model MODEL 0000 (00 if IPDS (4234-12) and 02 if SCS (4234-2))Type can be set to 6408 or 6412.CTA for 6408 or 6412 model.Advanced Function AFP *NO (See Note)Location Address LOCADR xxOnline at IPL ONLINE *YESAttached controller CTL Remote controller nameFont identifier FONT yyy (Default font identifier)Form feed FORMFEED * ContNote: AFP *Yes can be specified if the level of iSeries supports the printer as anAFP printer and PSF is installed.274 Infoprint 6500 User’s Manual
