Power StackerThis parameter determines whether or not the power paper stacker is enabled,which is the default, or disabled. This parameter is not presented if the powerpaper stacker is not installed.v Enable (the default)v DisableAuto ElevatorThis parameter exists only on printers with the power paper stacker installed. Thepower stacker has a sensor which detects paper movement and raises the stackeras the printed paper stack grows. If the printer has been printing for three minutescontinually and the sensor has not detected any growth in the paper stack, thestacker raises itself ¼ inch automatically.v Enable (default). The automatic elevator on the power stacker operates normally.v Disable. The stacker does not raise automatically every three minutes and isentirely dependent on the sensor. Disable is used with extremely high-qualityprint jobs that take a long time to print.Printer Management PortPrinter Management Port is the port used to connect the printer to the IBM PrinterManagement Unit (PMU). This menu option is a printer management tool thatruns on Host Computers. The options include:v Debug Ethernet (default)v Debug Adapterv Disablev SerialTop Exit Tear DistanceThe eject distance for the EJECT/RESTORE type TOP EXIT TEAR.v 7.46 Inches (default)v 4.50 - 10.50 Inches62 Infoprint 6500 User’s Manual
