Limitationsv Forms length maximum of 24 inches. In the cabinet models, forms longer than12 inches can be accommodated by opening the front and rear doors.v Maximum forms width of 17 inches (including tear strips) or 16 inches (withouttear strips).v Use 15 to 100 pound (6.8 to 45.36 kg) stock with a maximum thickness of 0.025inches (0.0635 cm).v Maximum print line of 13.6 inches.v Friction feed paper handling is not supported.v Use of high speed (Draft mode) fonts using greater than 15 CPI for criticalapplications should be tested, prior to production use, using your application todetermine if the output is satisfactory.v Processing of forms with black or dark colored backing, or forms withsee-through plastic or cellophane covered openings or windows may give falseEnd-of-Forms (EOF) signals. Request For Price Quote (RPQ) S02392(factory-installed) or S02394 (field-installed) may be ordered to provide amodified EOF switch to handle these types of forms. Contact your IBM SalesRepresentative or IBM Authorized Remarketer.v Downloaded characters are not supported in Proprinter, Epson, P-Series, P-SeriesXQ Variant, or Serial Matrix emulations.v Due to the variation in carbonless forms, you should test forms with four ormore parts for readability prior to production use. Carbonless forms can beaffected by storage and other environmental conditions and should be testedperiodically from your application to make sure the output meets yourrequirements.v Compatibility differences may exist when replacing or coexisting with olderprinters, due to technology differences, product and application customization,and emulations.v The coaxial portion of the IBM Coax/Twinax feature of this printer is subject tothe following limitations:Minimum dot matrix of 9 wide by 8 highMinimum dot matrix of 4 or 7 wide by 8 highNote: The following features are not supported:IBM 3287 Models 1C and 2CProgrammed symbols 2 and 4, 190 character downloadable fontsData analysis = APL featureGraphic escape268 Infoprint 6500 User’s Manual
