Chapter 4. The Configuration MenusConfiguration OverviewThis chapter describes the configuration menus. The Configuration Main Menuoptions and all of the submenu options are illustrated in menu diagrams anddescribed in detail. For procedures showing how to enter Program mode, save,recall, and print configurations, refer to Chapter 3, “Configuring the Printer,” onpage 19.Figure 11 on page 50 shows an overview of the configuration menus.The menus that are displayed from the operator panel are determined by theinstalled features. For example, if you ordered the IPDS feature, then the IPDSmenu would appear on the operator panel. If the IPDS feature is not installed,then the IPDS menu will not appear on the operator panel.Each feature is shipped with a document that describes the feature in detail.For more information about these documents, see “Related Documents” onpage xiiThe configuration menu diagram on page 50 shows the structure of theconfiguration menus and the parameter options available in each menu. Thediagrams list the menus and options in the order they appear when you use theoperator panel to configure the printer. Factory default configuration values areindicated by an asterisk (*).Pressing the operator panel keys (Enter, Return, ↑Scroll/Micro, and ↓Scroll/Micro)allows you to move through the menus and select various choices for the options,as follows:v The Enter key allows you to move down to a lower level in the menu structure,and to select an option value as the active value.v The Return key moves you back up the menu structure.v The ↑Scroll/Micro key moves forward through the options at a particular menulevel.v The ↓Scroll/Micro key moves backward through the options at a particularmenu level.These keys are summarized in a legend box at the lower right corner of eachconfiguration menu diagram.© Copyright IBM Corp. 2005 49
