Chapter 2. InstallationInstallation, Attachment, And Configuration OverviewNote!Before using this information and the product it supports, read theinformation and Communication Statements in “Notices” on page 293.DANGER<4> Do not connect or disconnect any communication port, teleport, attachmentconnector, or power cord during an electrical storm.<5> Power off the printer and disconnect the power cord before connecting ordisconnecting communication port, teleport, or attachment cable connector.The following is an overview of the steps you need to complete to successfullyinstall, attach, and configure your printer:1. Unpack the printer from the shipping package. Follow the instructionsprovided on the shipping package.2. Set up the printer, which includes; removing shipping materials, installing theink transport assembly, ink transport media, ink cartridge, and loading paper.Follow the instructions in IBM Infoprint 6500 Line Matrix Printers: Quick StartGuide.3. Perform an initial print test by printing the current configuration page asdescribed on page 24.4. Review the information contained in the README.1ST file on theConfiguration Utility section on the User’s CD.Note: The Configuration Utility section contains a README.1ST file thatdescribes the contents of the CD, AIX ® print drivers, and configurationinformation for replacing existing IBM printers. In addition, there mightbe another file, called README.TXT that contains information that wasadded after the printer documentation was printed.© Copyright IBM Corp. 2005 11
