World TradeThe 5225 emulation has a multinational character set that serves as a base for 14world trade character set assortments. They are shown in the 6500 Coax/TwinaxProgrammer’s Reference Manual.You can configure the printer to use the Standard Character Set so the printercontains the IBM World Trade character set, such as the Austria/Germanycharacter set. Or, you can select Extended Character Set and use the multinationalcharacter set as a base with the selected world trade character set overlaid.v Standard Character Set (the default)v Extended Character SetCancel BuffersCANCEL BUFFERS has the following options:v Enable (the default). Cancels all buffers when a job is put on hold from the hostor the Cancel key is pressed.v Disable. Clears the twinax internal buffer, not the print engine buffers, when ajob is put on hold from the host or the Cancel key is pressed.Early Print CompleteEarly Print Complete allows the printer to send Print Complete status to the hostbefore the printer is actually done printing all data. Early Print Complete is onlyavailable if the IPDS feature is installed.v Disable (the default). Means the printer will suppress the Early Print Completeresponse until all printing is complete.v Enable. Means the printer will send an acknowledgement to the host when it isable to accept more data.Note: When an Early Print Complete is enabled and an error occurs, the data inthe printer will remain in the buffer (regardless of the setting of the CancelBuffer option). It is recommended that local procedures be followed torecover from the error.Do not select Early Print Complete while a print job is in progress. If this isdone you will need to restart the printer.Chapter 4. The Configuration Menus 71
