Safety Notices<1> Before powering on the printer ensure the printer is plugged into anappropriate power source. Refer to Chapter 2 of the Setup Guide forinformation on the proper source.<2> Switch off the printer power and unplug the printer power cord beforecleaning the printer.<3> Do not connect or disconnect any communication port, teleport, attachmentconnector, or power cord during an electrical storm.<4> Power off the printer and disconnect the power cord before connecting ordisconnecting any communication port, teleport, or attachment cableconnector.CAUTION:This product is equipped with a 3-wire power cord and plug for the user’ssafety. Use this power cord in conjunction with a properly grounded electricaloutlet to avoid electrical shock.© Copyright IBM Corp. 2005 iii
