CPI/LPI SelectDefines the default values for the horizontal and vertical character spacing. Thenumber of characters per inch can range from 10.0 through 17.1. The number oflines per inch can range from 3.0 through 8.0.CPI Selectv 10.0 CPI (the default)v 12.0 CPIv 13.3. CPIv 15.0 CPIv 16.7 CPIv 17.1 CPISelect LPIv 6.0 LPI (the default)v 3.0 LPIv 4.0 LPIv 8.0 LPIFont AttributesTypefaceChoose a typeface from the available options:v Data Processing (the default). A general purpose font printing out at 120 dpihorizontally and 72 dpi vertically. The width of the font will vary with each cpi.v Gothic NLQ. A high quality font printing at 180 dpi horizontally and 96 dpivertically. This font has serifs and the width of the font varies with the cpi.v Character Graphics.v High Speed. A draft quality font printing at 120 dpi horizontally and 48 dpivertically. The width of the font varies with the cpi.v Italics NQL.v Courier NQL.v OCR-A / OCR-B. Optical character recognition fonts printing at 120 dpihorizontally and 144 dpi vertically. Both fonts print only at 10 cpi.Chapter 4. The Configuration Menus 155
